Shackle information–Lifting shackle & Commercial Shackle

The Shackle made by Alloy Steel for Lifting purpose/Mild steel for commercial connecting/Stainless steel for Sailboat Rigging/High tensile Steel for Towing and Trawling.

Shackles have 3 Types for the pin: Round Pin,Screw pin and Bolt Type(safety pin & nut).

The Round Pin Shackles can be used in tie down, towing, suspension or lifting applications where the load is strictly applied in-line.

The Screw pin Shackles can be used in any application where a round pin shackle is used.  In addition, screw pin shackles can be used for applications involving side-loading circumstances.  Reduced working load limits are required for side-loading applications.  While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.

The Bolt Type Shackles can be used in any applications where round pin or screw pin shackles are used. In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate.

Shackles meet the standard of RRC-271D/European type large DEE&BOW

Working Load Limit and Traceability codes shown as permanent marking on body or pin, for lifting shackle and trawling shackle, the commercial only mark the size.

Shackle Finish can be  in painted, galvanized and self-colored finishes or Power Coating.

All Lifting shackles have alloy quenched and tempered pins

Breaking load test certificate supplied as request.

The size from 3/16″ to size 4″ we can supply. More detail please contact with TOOLEE.