TURNBUCKLE DIN1480 PROCESS.

Assembly and packing. you can find the detail of our forged and sand blast before the galv.
The turnbuckle / stretching screw or bottlescrew is a device for adjusting the tension or length of ropes cables, tie rods, and other tensioning systems, it normally consists of two threaded eyelets, one screded into each end of a small metal frame, one with a left hand and the other with a right hand thread. The tension can be adjusted by rotating the frame, which causes both eyelets to be screwed in or out simultaneously, without twisting the eylets or attached cables.

Turnbuckle widely using for AIRCRAFT / SHIPPING, SPORTS Entertainment industry

Turnbuckles are most commonly used in applications which require a great deal of tension; they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges.

Above information from WIKI.

Usually using together with steel wire rope sling ends and a Rings at the end.

Toolee can supply the turnbuckle for DIN1480 standard, size from 6mm m6 to 36mm, M36. eye eye type, eye hook type, hook hook type.

WWW.TOOLEEGROUP.COM
WWW.TOOLEETURNBUCKLE.COM
COPY RIGING@TOOLEE.COM