Wire Rope Clips Using Warning!!

Read and follow all instructions and warnings. Failure to do so could result in injury or death.
• Select the correct wire rope clips for the application.
• Never use cast malleable wire rope clips for lifting or suspending ANY load.
• The size of the wire rope clip must match the size of the wire rope or cable diameter.
• When applying a wire rope clip to coated cable, always match the size of the wire rope clip to the diameter of the uncoated cable.
The cable coating must be stripped off of the cable where wire rope clips are to be attached.
• Never use fewer than the number of clips defined in the specifications for each type of wire rope clip.
• Never use wire rope clips on pipe, rod, chain, fiber rope, etc.
• Never connect two ends of wire rope with wire rope clips.
• Never shock load or impact wire rope or cable when wire rope clips are applied.
• Inspect wire rope clips before each use. Discard and replace wire rope clips that are worn, distorted, or damaged.
• Inspect wire rope clip nuts before and after each use and re-torque as is necessary.

For Select the Wire rope Clips Please view Special wire rope clip page.

TOOLEE GROUP INC.

Qingdao Lifting and Rigging Corp.