After 30 days working, TOOLEE 2012 NEW CALENDAR FINISHED.

On first page you can find the lashing hook, drop forging for shackle, G80 chain sling with clevis hook, polyester sling, and chain block.

Generally speaking, this calendar is TOOLEE’S FULL PRODUCTION FLOW CHART together with all reference pictures.

Jan. 2012 the picture showing for Raw material and Material Analysis.

Feb.2012, the picture showing for Cut material.

Mar. 2012, the picture showing forging.

Apr.2012, the picture showing Trimming/Shot blasting

May.2012, the picture showing Heat Treatment.

Jun.2012, the picture showing Machining.

Jul.2012, the picture showing Magnetic Particle Testing, Cause the Grade 80 and grade 100 chain fittings needs Magnetic testing.

Aug.2012, the picture showing assembly.

Sep.2012, the picture showing Testing Center for breaking load test and hardness checking.

Oct.2012, the picture showing Painting/Coating/Galvanising.

Nov.2012, the picture showing Packing. cartons/drum/ gunny bags and then on pallets.

Dec.2012, the picture showing loading into container and shipping on the sea.

The last page showing a full production flow chart, and at the left center of the page, you can scan for toolee Contact details.

AT THE BACK PAGE: THERE IS DETAIL SHOWING FOR THE

LIFTING CHAIN FOR JAN,SAFETY HOOK AND CONNECTING LINK FOR FEB, SHACKLE FOR MARCH, WEBBING STRAP FOR APRIL, WIRE ROPE FOR MAY, TUBE FISHING THIMBLE FOR JUNE, WIRE ROPE CLIPS DIN1142 FOR JULY, BLOCK FOR AUGUST, STAINLESS TURNBUCKLE FOR SEPTEMBER, STAINLESS QUICK LINK FOR OCTOBER, BLUE PAINTED CHAIN FOR NOVEMBER, RATCHET LOAD BINDER FOR DECEMBER.

TOOLEE

2011,DEC.30

After Two years working by Tonny And Burning! all Design by Burning.

this new catalogue is ok now, the printing already finished.

All items have a individual code, which including chain and chain fittings, Grade 80 and commercial, All shackles, and the wire rope and wire rope fittings, in this catalogue you can get the polyester lifting sling and wire rope sling assembly, also the lifting chain sling working style.

MAINLY FOCUS ON LIFTING RIGGING AND LASHING.

BELONG TO TOOLEE.

TOOLEE

DEC.20,2012

As my checking and walking 3 days on Canton Fair, Maybe my idea is not right , maybe right:

question 1. :

Labours difficult to find.

question 2.

Raw Material shortening Supply.

question 3.

The fittings can’t supply in Time.

question 4.

Efficiency decrease cause the labour do not wanna to earn the money as before with do not consider the healthy.

the question 1 problem have some below reasons:

a) people have more choice compare before with the economic developing, original , people have no choice but only come to factory for earn money.

But now, people can find a job very easy, such for the third party service company.

b), the whole market , labour becoming shortening supply, cause the born limited policy.

c) labour know more, and learn more, they wanna to change, so a lot of labours wanna to find a better, they are in a way to find a better one.

for the question 2.

Cause some company and government limited sales for get more profit.

for the question 3.

As the whole market labour shortening supply, so the small factories which produce the fittings for big company have the problem for hold the labours, as the small factory can’t compare with the big company.

For the question 4.

people becoming focus some eyes on health not only on money. some times, maybe they only wanna earlier USD200.00 instead of USD400.00 if they needs to pay more times. people needs their leisure time.

just guess.

by tonny

TOOLEE INDUSTRIAL TECHNICAL

for detail please check with http://www.tooleelifting.com/Webbing-Sling/

COPY RIGHT AT TOOLEE GROUP WWW.TOOLEELIFTING.COM

http://www.rigginglifting.com/Synthetic-Slings/Cargo-Lashing/Cargo-Lashing1.html

The lashing Strap size we can supply with width 25mm 1″, 35mm 1.5″, 50mm 2″, 75mm 3″ 100mm 4″

Our Special WEbsite for our Chain Sling material: WWW.TOOLEELIFTING.COM

Which including LASHING CHAIN, TENSIONER BINDER, LASHING C HOOK www.tooleelashing.com

here is some picture from TOOLEE stand

For more detail about TOOLEE LIFTING MATERIAL, please view: www.tooleelifting.com

the picture including: LIFTING CHAIN SHORT LINK GRADE 80.

EYE SAFETY HOOK WITH GRIP.– THE TOP ONE.

eye sling hook with safety latch— top two.

master link — middle

clevis sling hook — left

and one omega link— the right bottom.

for more grade 80 chain and chain fittings please view: www.tooleelifting.com

Detail is: http://www.rigginglifting.com/Grade-80-Alloy-Fittings/Hoist-Swivel-Ring/Hoist-Swivel-Ring1.html

G80 Alloy Hoist Ring with Ball Bearing Swivel, Made by Toolee

Material &Process: Alloy steel, Heat Treated.

With TOOLEE RECOVERY STRAP, pulling out.

Detail for Recovery strap please view www.tooleegroup.com

The Two end fittings is shackle with 3/4″, working load is 4.75ton. breaking load is 28.5ton.

Shackle detail from www.tooleeshackle.com

Copy right @tonny. Toolee Group Industrial.

with all details.

on this website you can find all stainless from TOOLEE. which including two main parts, stainless steel rigging accessories. stainless steel boat accessories.

such for: Shackle hook turnbuckle thimble stauction base station wire rope chain.

Noted: all these material made by stainless steel.

2. regularly lubricate pivot swivel and screw bars(Ratchet type)to extend product life and reduce friction wear.

Manufactured by TOOLEE GROUP INC.

3 inch shackle on Ground.

tooleeshackle.com

tooleeshackle.com the side cutting.

mark of the shackle. very very clear, all made by TOOLEE.

3″ MARKING.

THE SHACKLE’S ROUND BOLT. HEAD.

SHACKLE ON GROUND.

SHACKLE COMPARE THE CAR KEY.

THE 3 INCH SHACKLE IN STOCK. ALL PHOTOED BY TONNY. TOOLEE GROUP INC.

THE 3 INCH SHACKLE IN STOCK. ALL PHOTOED BY TONNY. TOOLEE GROUP INC.

ALL RIGHT RESERVED. NO USE WITHOUT ANY CONFIRMATION.

WWW.TOOLEESHACKLE.COM

SHACKLE, HIGH TENSILE STEEL REFERENCE WEBSITE: WWW.TOOLEESHACKLE.COM

ONE WAY BUCKLE, FOR PACKING AND LASHING SYSTEM. REFERENCE WEBSITE: WWW.TOOLEELASHING.COM

GRAB HOOK GRADE 70 FOR TRANSPORT SECURE. REFERENCE WEBSITE: WWW.RIGGINGLIFTING.COM

WIRE ROPE SLING SWAGED EYE WITH ALUMINUM FERRUL. REFERENCE WEBSITE: WWW.RIGGINGLIFTING.COM

these pictures photoed by TONNY, in LOS ANGLES, a shopping center.

I made these picture with my CAMERA, a very beautiful place use with big size TURNBUCKLE, and shackle, Also with wire rope and wire rope terminal for FIXED, all products with HOT DIPPED GALV.

PRODUCTS ON SHOW

TOOLEE AT NATIONAL HARDWARE SHOW. WEBBING SLING, WIRE ROPE SLING.

TONNY AT NATIONAL HARDWARE SHOW, CHAIN AND CHAIN BINDER, TENSIONER.

TOOLEE GROUP SHOW THE G70 CHAIN AND G80 LIFTING CHAIN

from TOOLEESHACKLE.COM you can find almost all shackle, from forged (lifting shackle and fishing trawling shackle )to machine to cast(stainless shackle).

We have many kinds of shackles if you are interested in, not only the standard shackles ,but also the special shackles .If you need some shackles ,just link our website www.tooleeshackle.com ,we believe you can get the suitable shackles . If you have any questions, please send email to me and you can get reply very soon.

toolee group inc.

1. G70 6mm, demension: 6mm*34mm(inside length)*9mm(inside width) 70000m.

2. G70 8mm, demension: 8mm*54mm(inside length)*12.5mm(inside width) 10000kgs.

If you need these chain, please contact with TONNY@RIGGINGLIFTING.COM

Thanks

Toolee group inc.

2010.03. 30

EVERYTHING ABOUT RORO LASHING AND CONTAINER LASHING ON-LINE. special in RO RO LASHING, such for CHAIN LASHING SYSTEM, we always keep in stock for LASHING CHAIN and lashing split hook C type.

europort 2009

EUROPORT 2009 start today! TOOLEE 6.723 welcome you coming!

more pictures will coming, today i attached one picture of our stand.

Toolee’s stand number is 6.723

on exihibition TOOLEE will showing the lifting serious, lashing system, rigging acciessoies, and wire rope sling serious.

Which including RO RO lashing chain, tensioner lever, decking lashing d link. lifting chain and chain fittings.

More products information please visit our stand.

Toolee group inc.

2009 oct.27

toolee attend the world fishing exihibition

Accepting the invitation from World Fishing Exhibition(Vigo), Our company, TOOLEE GROUP INC. (TOOLEE GROUP INDUSTRIAL CO., LTD), will attend the World Fishing Exhibition to be held in IFEVI Exhibition Centre(VIGO,SPAIN) from 16^th to 19^th of September 2009.

Once again to tell you that our exhibition stand is F30 in Hall 1. hope you who are interested in our products can go to the exhibition to have a face to face talk.

And the sponsor of World Fishing Exhibition(Vigo,2009) anounced that Visitors registering online for the World Fishing Exhibition and Aqua Farming International by the 31 August 2009 will save the 30 Euro entrance fee. All visitors registering online will also receive their badges in advance, thus saving time at the exhibition.  Visitors to the exhibition who have not registered online will be charged the 30 Euro admission fee on site. Please note that children under 16 years old are ONLY permitted entry on Saturday 19 September and ONLY when accompanied by an adult. To register online visit:

http://acreditaciones.worldfishingexhibition.com/web/index_asistentes_en.cfm

Please note that only 12 days are left for the free online visitor registration deadline.

So do not hesitate at registration online for WFE.

TOOLEE GROUP INC.

The previous exhibition in 2003 consisted of almost 800 companies from 80 nations converging on Galicia to do business. Over 70,000 world wide professionals attended that show spending an estimated EUR 400 million.

The World Fishing Exhibition has its own history. Celebrated for the first time in 1963 in the United Kingdom as a biannual event, the first four shows were held at the famous Earl’s Court and Olympia Hall. After the 5th exhibition, the show went on the road to other countries and in 1971 took place at The Royal Dublin Society were it was organized by the Irish Government. The sixth edition, which was the first in Spain, was held in Vigo in 1973. Thereafter it travelled to Marseille, Halifax and Copenhagen.

From 1963 to 2003 the World Fishing Exhibition increased in both size and significance. Each show increased number of companies showing as well as for the amount of international visitors it received.

As the headquarters of the fishing world, Situated to the South of the North-West peninsular, the Port of Vigo annually auctions around 90,000 tons of fresh fish at its installations in O Berbes. The cold storage capacity of Vigo and its environs is about 700.000 tons, giving Vigo a leading position in national terms. Fishing is Vigo’s Alma Mater and this has given life to a vast industry in the town which includes shipyards, ancillary industries, commerce and distribution, cold storage, canning factories, fish products and marine cultivars.

Exhibition Centre, IFEVI is conveniently located next to Vigo’s Peinador Airport and is easily reached by a network of toll-free motorways which link Vigo to the rest of Spain and Portugal. IFEVI is only 10 minutes away from downtown Vigo and is well served by public transport (bus C9A) and taxi services, there is a taxi rank at IFEVI while an event is taking place.

TOOLEE would like introduce you some types of swaging sleeves:

Oval sleeves

Oval sleeves are an ideal way for making a neat, strong eye splice in a matter of seconds without frayed cable ends (use a stainless thimble). For eye splices, one stainless oval sleeve will hold full rated cable strength on 7 x 7 or 7 x 19 cable. On 1 x 19 we recommend using two stainless oval sleeves on each end to hold full rated strength . The copper sleeves hold almost at full cable strength; to be conservative estimate about 80%. Again, use 2 sleeves on 1 x 19 wire. Aluminum swage sleeves (It is also called aluminium ferrules)  will only hold about one half the cable strength – Don’t use in the marine environment. Crimping of sleeve must be done with a oval swage sleeve tool or the “Swage-It” tool, to insure maximum holding power. We also carry stainless steel sleeves (stainless is not for hand swaging). The copper stop sleeves are for designed for the end of the wire rope (single wire inserted) and provide a stop when crimped on.

s-505 & s-506

S-505 Standard Sleeves (in carbon steel) are recommended for use with 6 x19 or 6 x 37, IPS or XIP, XXIP (EIP), RRL, FC or IWRC wire rope. S-505 & s-506 is used for For Flemish eye wire rope splicing. Resists cracking when swaged (equals or exceeds stainless steel sleeves). Can be stamped for identification after swaging without concern for fractures when following these directions.Use round corner stamps to a maximum depth of 0.015 in. (1/64). The area for stamping should be on the side of the sleeve in the plane of the sling eye, and no less than 0.250 in. (1/4 ) from either end of the sleeve.

Standard Steel Sleeve terminations have efficiency ratingsas follows based on the catalog strength of wire rope.

T-ferrules, UM-ferrules and R-ferrules

The original T-ferrule design is the seamless aluminium ferrule, intended for galvanized or bright wire ropes. It corresponds to European standard, EN 13411-3. From size 8 and upwards fully traceable (ISO 9001) and marked with size, type and manufacturing batch number.

The UM-ferrule (Ultagrip Metal) is a cylindrical ferrule, smaller in diameter after pressing than the T-ferrule.

The seamless ferrule made from carbon steel is aimed for bright and galvanized steel wire ropes. Using the same metals between rope and ferrule prevents electrolytical corrosion. The are intended for applications where high temperatures and/or abrasion, e.g. the steel melting and fishing industries. From size 8 and upwards they are fully traceable (ISO 9001) and marked with size and type.

Ferrules made of copper and stainless steel.

The round R-ferrule is intended to be pressed on single wire ropes, e.g. on preventer wires or used as end stop.

TOOLEE GROUP INC.

• The shackle pin shall never be replaced with a bolt; only a properly fitted pin shall be used. Bolts are not intended to take the load that is normally applied to the pin.

• Shackles shall not be used if the pin cannot be completely seated.
• Shackles shall never be pulled at an angle because the capacity will be tremendously reduced. Centralize whatever is being hoisted on the pin by suitable washers or spacers .

• Screw pin shackles shall not be used if the pin can roll under load and unscrew.

Anchor-Shackle-Bolt-Type-Forged-Alloy-high-tensile

Shackles

are U-shaped pieces of metal secured with a pin or bolt across the opening, or hinged metal loops that are secured with a quick-release locking mechanism. There are three basic types of shackles. All meet or exceed U.S. Federal Specification RRC-271D,

“Chains and Attachments: Welded and Weldless”, and are made of alloy steel or carbon steel. They are available in painted, galvanized or self-colored finishes and use quenched or tempered pins. Class 1 shackles pass a rounded pin through holes at the base of the shackle.

A spring-actuated cotter pin or hair pin holds the butt end of the shackle in place. Class 2 shackles use screw-pins that pass through an opening on one only side of the shackle. The pins use a key-like design and exhibit extreme deformation before failure.

Class 3 shackles have safety anchors or chains that are held in place with a nut and bolt on opposite ends of the pin. Shackles that meet Amendment 1 to Federal Specification RRC-271D are also available.

Selecting shackles requires an analysis of specifications and features. Dimensional specifications include: pin or bolt diameter, hole diameter, width at eyes, width at bow, width between eyes, inside length, inside width at bow, outside diameter (OD) of eye, approximate weight, and estimated weight per hundred.

Some shackles use English measurements such as inches (in) or fraction of inches. Others are measured in metric units such as centimeters (cm) or millimeters (mm). Performance specifications for shackles include working load limit (WLL), an amount that is usually measured in tons.

Specialized shackles may carry additional specifications or provide optional features. For example, stainless steel screw-pin anchor shackles provide improved corrosion and chemical resistance.

Trawling shackles have heat-treated bodies and square headed pins that facilitate tightening and loosening.

Web sling shackles may be hot-dip galvanized or zinc-plated, and provide an ultimate strength equal to four times the working load limit.

• Never return damaged shackles to storage. They should be dry, clean and protected from corrosion.

 

• Do not alter, modify or repair shackles and never replace missing pins with unidentified pins, bolts etc, but refer such matters to a Competent Person.
• Never galvanise or subject a shackle to other plating processes without the approval of the supplier.

 

Selecting turnbuckles requires an analysis of product and performance specifications.In order to check the quality is good or not, Firstly you should pay attention to the surface, it should be smooth and sleek. Secondly, check the size of turnbuckles. Basic measurements include diameter, take up, length, and estimated weight. The last but not the least , you must accord the application decide which type turnbuckle you should choose. If only these there points are up to standard, we can asure the turnbuckle is good and use it assured.

• Do not replace the shackle pin with a bolt . A load will bend the bolt.   

•  Do not allow a shackle to be pulled at an angle. The legs will open. Pack the pin with washers to center the shackle.

•  Do not use screw pin shackles if the pin can roll and unscrew. If the load shifts, the sling will unscrew the shackle pin.

This is the basic situation which you should avoid , understand it ,you can use it better.

From CCOHS.

(1)    hooks of different types should be used only for their intend purpose.e.g. foundry hook has a wide, deep throat to fit for handles on molds and castings; Grab hook has a narrow throat and is used to hold a length of chain by engaging one link flat in the hook between two other chain links; The sorting hook has a point designed to fit into holes. Some choker slings are fitted with a sliding choker hook that engages the eye of the sling.

(2)    The weight of the load to be lifted should not exceed the rate load of the hook or of the hoist equipment or sling assembly of which the hook is a component.

(3)    Loads applied to hooks should be centered in the hook saddle—not on the point of the hook

(4)    Shock loading, such as sudden, jerky lifting of the load, should be avoided.

(5)    If you use a latch or other device to close the throat of a hook, be careful not to apply the load to the closing device.

(6)    Take care to keep hands, fingers, and body from between the hook and the load.

2.       hooks should be inspected frequently and periodically. Frequent inspections are visual examinations the operator should make every day before using the equipment. Periodic inspections should be conducted at regular intervals by specially designated inspectors. The length of inspector intervals depends uopn the type of hook service. Records shoule be maintained as a basis for continuing evaluation.

3.       the  followiing are some of the reasons for removing a hook from service and replcing it:

(1)    hook throat has increased by more than 15%.

(2)    Wear exceeds 10% of the original hook section dimension, or there is a bend or twist of more than 10°from the plane of the unbent hook.

(3)    Hook shows cracks, excessive nicks, or gouges. These damages can sometimes be repaired by filing along the hook contour. The hook can not be reused, however, if the filing reduces any dimension by more than 10% of its original value.

(4)    The portions that form the throat of a grab hook are not parallel.

4.       twist or increase in throat opening is often an indication of abuse or overload of the equipment. In such instances, other components of the sling or hoisting mechanism should also be inspected for damage.

TOOLEE GROUP INC.

• Store and handle shackles correctly.

• Inspect shackles before use and before placing into storage.

• Select the correct pattern of shackle and pin for the application.

• Allow for the full resultant imposed load.

• Fully tighten the pin.

• Ensure the load acts through the centre line of the shackle using spacers if necessary to meet this requirement.

NEVER:

• Use shackles with bent pins or deformed bodies.

• Force, hammer or wedge shackles into position.

• Eccentrically load shackles.

• Replace the pin with a bolt.

• Fit pins in contact with moving parts which may loosen or unscrew them.

• Shock load shackles.

Before you use the shackles ,you should refer to the instruction ,it can help you to use them .

Next time we will introduce the slings one by one.

TOOLEE GROUP INC.

●     Chain slings must not be heat treated, galvanized, plated, coated or subjected to any process involving heating or pickling. Each of these processes can have dangerous effects, reducing the strength of the chain and will invalidate the manufacturers certification.

●     Chain slings may be used at temperatures between -40°F to 400°F (-40°c to 205°c) with no reduction in the working load limit.

●     When using slings in exceptionally hazardous conditions such as lifting of potentially dangerous loads, including molten metals and corrosive or fissile material, the degree of hazard should be addressed by a competent person and the working load limit adjusted downward accordingly.

●     Never attempt to repair a damaged sling, replace it immediately. Damaged slings may be repaired only on the advice of the chain sling manufacturer and returned to service only after complete inspection and proof testing.

A sliding link is fitted on a bearing and guide column forming part of the sledge. The sliding link consists of an inner hollow cylinder and an outer hollow cylinder coaxial therewith. The rammer is coupled to the sledge via holding arms fitted on the outer hollow cylinder. When the sledge is taken into the horizontal position, the weight of the rammer imposes considerable moments on the sliding link. Thus immense tensile forces are applied to the upper sliding links and tremendous pressure to the lower sliding link. The tensile forces are absorbed by the engagement over the centre line in region. Likewise, the pressures are absorbed in region of the lower sliding links. The leverages can amount to several thousand kpm. The sliding link ensures that the tensile and pressure forces are properly controlled.

Toolee supplies you sliding link as lashing wire rope serious, more detail please view www.tooleelashing.com

TOOLEE GROUP IN

 Round Pin Shackles: Used in tie down, lifting, towing or suspension applications with loads that are strictly applied in-line .         

Screw pin shackle                          

 Screw Pin Shackles: Used in any application where a round pin shackle could be used. Additionally, can be used in applications involving side-loads. Reduced working load limits are usually required for side-loading applications; never allow the screw pin to be rotated by a live line such as a choker application.

  Bolt-type shackle                      

Bolt-Type Shackles: Used in any application where round or screw pin shackles are used. Also appropriate for permanent or long term installations or when the load may slide on the shackle pin, causing the pin rotation.

a log hook comprises a main body in an inverted U-shape configuration forming two legs. The first leg has a handle at its distal end, and the second leg has a hook element at its distal end. There is a bridge portion formed between adjacent ends of the two legs. The bridge has cutting blades attached at a predetermined position, provided to sever branches from a tree trunk. The blades extend along the outer and/or the inner edge the bridge portion. The inner edge blade can extend continuously along the bridge portion and the first leg. Cutting blades can be attachably mounted on existing log hooks with an attachment bracket. The hook element is attachably mounted to the distal end of the second leg with a fastening element.

The invention of log hook provides an improved tool which can be used for both purposes: to manipulate the trunk of a tree and to cut all branches in an easy and simple manner, shorten the time necessary to process all cut portions of fallen trees in an easy, fast, safe and simple operation.

If you hane some idea about log hook, welcome to contact us.

Ps:  Tomorrow is the Dragon Boat Festival, also called Double Fifth Festival. It is one of the most important Chinese festivals. So we all staffs will have one day rest. but if you have any questions about our products, we will reply you soon.

TOOLEE GROUP INC.

WIRE ROPE THIMBLE, ROPE CLIP, SHACKLE HOOK

Wire rope assemblies

We have some introduction to wire rope in recent days, today we will introduce you Wire rope assemblies, hope that will do some favor to you.

Because the end of a wire rope cannot be easily connected to plant and equipment. There are different ways of securing the ends of wire ropes to prevent fraying. The most common and useful type of end fitting for a wire rope is to turn the end back to form a loop. The loose end is then fixed back on the wire rope. Then a wire rope thimble is used.When the wire rope is terminated with a loop, there is a risk that it will bend too tightly, especially when the loop is connected to a device that spreads the load over a relatively small area. A thimble can be installed inside the loop to preserve the natural shape of the loop, and protect the cable from pinching and abrading on the inside of the loop. The use of thimbles in loops is industry best practice. The thimble prevents the load from coming into direct contact with the wires.

A wire rope clamp, also called a clip, is used to fix the loose end of the loop back to the wire rope. It usually consists of a u-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the u-bolt. The saddle is then fitted over the ropes on to the bolt (the saddle includes two holes to fit to the u-bolt). The nuts secure the arrangement in place. Three or more clamps are usually used to terminate a wire rope. There is an old adage which has over time become the rule; when installing the three clamps to secure the loop at the end of your wire rope make sure you do not “Saddle a Dead Horse!” The saddle portion of the clamp assembly is placed and tightened on the opposite side of the terminal end of the cable.

Aluminum Ferrules is used as mold and stays on after pouring the zinc, Toolee aluminum Ferrules comply withBS5281, ISO 8793 and DIN 3093 Standards for Dimension and Performance. Designed and Manufactured to the Quality Requirements of BS EN ISO 9001:1994,Are Perfect For Forming Loops And Eyes in Galvanized Wire Rope.

Wire rope slings-Safety is of paramount importance in any wire rope sling. It is important to remember, where a sling with two or more legs is involved, that consideration must be given to the fact that the stress in a sling varies with the angle at which the legs are used.

Toolee supplies you wire rope assemblies as above, if you have any interest in them, please contact us, and we also welcome some specialists to our website and give us comments, we could talk deeper about wire rope. Thank you

TOOLEE GROUP INC.

A twist shackle is usually somewhat longer than the average, and features a 90° twist so the top of the loop is perpendicular to the pin. One of the uses for this shackle include attaching the jib halyard block to the mast, or the jib halyard to the sail, to reduce twist on the luff and allow the sail to set better.

Bow shackle with a larger “O” shape to the loop, this shackle can take loads from many directions without developing as much side load. However, the larger shape to the loop does reduce its overall strength. Also referred to as an anchor shackle.

Lay means the direction in which the wires and strands are twisted around the rope.

Left and right hand lay

Left hand lay or right hand lay describe the manner in which the strands are laid to form the rope. To determine the lay of strands in the rope, a viewer looks at the rope as it points away from them. If the strands appear to turn in a clockwise direction, or like a right-hand thread, as the strands progress away from the viewer, the rope has a right hand lay. If the strands appear to turn in an anti-clockwise direction, or like a left-hand thread, as the strands progress away from the viewer, the rope has a left hand lay.

Ordinary, Lang’s and alternate lay

Ordinary and Lang’s lay describe the manner in which the wires are laid to form a strand of the wire rope. To determine which has been used first identify if left or right hand lay has been used to make the rope. Then identify if a right or left hand lay has been used to twist the wires in each strand.

Here we give two examples to explain the lay of wire rope.

Look at picture 1(Lhol_wire_rope)

Left-hand ordinary lay (LHOL) wire rope (close-up). Right-hand lay strands are laid into a left-hand lay rope.

Look at picture 2(Rhll_wire_rope)

Right-hand Lang’s lay (RHLL) wire rope (close-up). Right-hand lay strands are laid into a right-hand lay rope.

Toolee’s wire rope usually in Right-hand ordinary lay. Welcome to contact us.

TOOLEE GROUP INC.

D-shackle also known as a chain shackle, D-shackles are narrow shackles shaped like a loop of chain, usually with a pin or threaded pin closure. D-shackles are very common and most other shackle types are a variation of the D-shackle. The small loop can take high loads primarily in line. Side and racking loads may twist or bend a D-shackle.

First I’d like to introduce you the construction of the wire rope

Wire rope is composed of wires, strands and a core.

The basic unit is the wire, which is formed into strands.

Various types of wire rope have been designed to meet a wide range of uses and operating conditions. These types are designated by the kind of core; the number of strands; the number, sizes and arrangement of the wires in each strand; and the way in which the wires and strands are wound, or laid, about each other. E.g. wire rope 6×19+fc, “6”means Number of strands that make up the rope, “9”means Number of wires that make up each strand, and “fc” means Fibre core(see picture below)

Next time we will intruduce you the lay of wire rope, welcome to visit us.            

TOOLEE GROUP INC.

As lashing or lifting point connecting with other rigging fittings, It is also called Non-lockable bottom stacking cone or stacking peg, and in marine products, it is often called lashing eye.

A lashing eye for lashing or tying down goods on freight vehicles includes a keeper cup(bracket/plate) with a lashing or fastening ring pivotably mounted therein and a bolt fixing, the bolt of which passes through the cup. The ring and cup are made as separate parts. The ringis removably mounted in a recess  made in the cup, said recess being open, at least on one side, and situated at one side of the bolt of the bolt fixing. The ring is kept in place in its recess by the bolt fixing. The cup and ring preferably are two separate parts made as castings.

Lashing eye allows a variety of attachments,it is for round pot insertion.

We also supply you deck lashing d-link with support and bracket, welcome to contact us.

TOOLEE GROUP INC.

Grab hooks and slip/sling hooks are manufactured with two types of ends: the clevis type end and the eye type end. The clevis type end has a pin that slips through the chain and the top of the hook to make the attachment to the chain. The eye type end is attched to the chain by welded link or a connecting link. Each type of end has the same strength rating, when properly insalled and matched to the chain.

The grab hook is designed to hook onto a matched chain between the links. It is normaly attached to the master link, connected to the ends of the chain, or joined to another grab hook with a short piece of chain. Two grab hooks can be used to connect two separate pieces of chain. The grab hook is commonly used to hook back into the chain between the links after wrapping an object, to connect separate pieces of chain, and to permit the rescuer to shorten the chain by hooking back to the grab hook.

SLIP HOOK

The slip/sling hook

is designed with a wider throat, which is the space between the tip and the back of the hook, than the grab hook. This allows items such as webbing, chain, master links, or shackles to be placed on the hook do not slip out when there is no weight holding them in place. The grab hook does need a safety catch.

Welcome to contact us

All the turnbuckles mentioned above are meet the Amercian standard FF-T-791B.US type turnbcukle are forged by high carbon steel and hot dip galvanized finished, End Fittings are quenched and tempered.US type turnbuckle’s Proof load is 2.5 times working load limited. Ultimated load is 5 times working load limited.

Turnbuckles should be inspected before use to ensure that:

1) all markings are legible

2) the threads of the pin and the body are undamaged

3) the body and the pin are not distorted or unduly worn

4) never modify,repair or reshap a turnbuckle by heating as this will affect the working load limit.

For all types of turnbuckles, there are several basic configurations: stub end, eye and eye, hook and hook, jaw and jaw, and jaw and eye. Stub end turnbuckles feature a steel rod that protrudes at both ends. Eye and eye turnbuckles have two circular or oval-shaped eyes. Hook and hook turnbuckles and jaw and jaw turnbuckles have either two hooks or two jaws, respectively. Jaw and eye turnbuckles are designed for specialized applications.

At the thumb screw end, the elasticity of the shackle’s body locks the pin’s position into one or other of its small indentations. There is no need to worry about it accidentally coming loose due to vibrations.

Not only are these self-locking, the pin is also connected to the body at all times, even when fully opened. Consequently, there is no more risk of seeing it fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand.

Closing these threadless shackles is done simply by rotating the pin half a done simply by rotating the pin half a turn: it doesn’t get much quicker? For major loads, there are also high-resistance versions.

Here we are Special Manufacturer & Supplier for various types of self-locking hooks, including clevis type,eye type, grab type, swivel type in U.S.TYPE, ITALIAN TYPE,EUROPEAN TYPE and so on. Besides, we are also specialized in Special types of self-locking hooks,such as swivel self-locking hook with bearing, long body self-locking belt hook, self-locking hook with grip. customized hooks are acceptable. Welcome to contact us.

 Flat Webbing Sling & Endless Webbing Sling

Webbing Sling is a sling,made of 100% high tenacity polyester with woven edges. It goes in a variety of different types, in order to serve a particular application .

According to today’s working capacity, TOOLEE can manufacture webbing sling of  the width ranging from 25 to 300mm with  its thickness from 0.6mm to 4.0mm. And our prodcution capacity of 65 narrow fabric weaving machines can surely  guarantee the production and shipment for you at the leading time .

It is featured as soft and light for easy rigging and conforms to the shape of  load. To the cost ,it is an effective choice in high capacity lifting or pulling pplications.

TOOLEE‘s round sling is applied with double layered tubular sleeve to further protect the internal yarn filament. And we can make Working Load Limit from 1T to 20T, with its length up to 100 meters.

Toolee ‘s  Trawling shackle can be divided into 2 types  of  Trawling Shackle, One is  Forged Trawling Shackle:

Trawling Shackle Dee Type ,Square Head pin, Toolee

Trawling Shackle Bow Type, Square Head pin,Toolee

Trawling Bow Shackle,Square Head, Forged,Toolee

Trawling DEE Shackle,Square Head, Forged,Toolee

They are all Forged and used for Trawling  ,they also have square head and meet the Amercian standard.They have the difference too. Trawling Shackle Dee/Bow Type ,Square Head pin, Toolee are made of carbon steel ,their finish can be self color or painted or galv. or hot dipped galv.But for Trawling Bow/Dee Shackle,Square Head, Forged,Toolee are made of  high tensile steel, Grade 6, quenched and tempered.Their finish is hot dipped galvanized.

And the other one is Commercial Trawling shackle:

Trawling Bow Shackle,Square Head, European,Toolee

Trawling Dee Shackle,Square Head, European,Toolee

They are all made of  mild steel, Grade 30 and meet the European type ,their finish is self color, painted, galv. or hot dipped galv.

All the Trawling shackles have the same features: they have Square head pin,and they are used for Trawling .

If you need Trawling Shackle ,You can choose Toolee’s Trawling Shackle.

Because Toolee have a full set of  process to handle the shackles.

We have good source of  factory ,all the material will be inspected strictly .The good material make the basis of  the good quality .You can trust Toolee’s quality .

And the size is extremely exact , It is the standard .

Our price is not the lowest ,but it is the best reasonable .The price is always stable ,Once you choose Toolee ‘s Shackle ,you will  believe it .

All the sections of  making a shackle will be inspected carefully , you can just choose Toolee ,Toolee will supply the good shackle to you .

Welcome to view our web page of  shackle .

As for the 6*19s ,the steel wire is different,the outer wire is thick, the inner wire is thin.
But for the 6*19 ,they have uniform thickness.

This is the difference with 6*19s and 6*19.

Wire rope consists of a group of strands laid helically around a core.  The strands of a wire rope consist of a number of individual wires laid about a central core.

Wire rope is versatile.  It can be used to transmit motion through almost any plane or angle, to guy or tie down, to hold back, launch or control; to counterbalance, to guide or to lift or to do hundreds of other jobs.

TOOLEE can supply the wire rope made by stainless steel aisi304 aisi316 or high tensile steel, with NYLON or PVC covered.

Now we will introduce some basic knowledge about Synthetic Web Sling.It is useful for you to know the web sling .

Advantages
” Extremely flexible
” Mold to shape of load
” Will not damage the load
” Relatively light weight

Disadvantages
” Subject to heat damage
” Stretch under load
” Subject to cut or tear
” Subject to damage due to sharp angles
” Requires tag on sling

Web slings conform to irregular shapes

]]> http://www.toolee-inc.com/html/90-synthetic-web-slings.html/feed 0 http://www.toolee-inc.com/html/82-wire-rope-clips-using-warning.html http://www.toolee-inc.com/html/82-wire-rope-clips-using-warning.html#comments Tue, 03 Feb 2009 14:21:29 +0000 tonny http://www.toolee-inc.com/?p=82 Read and follow all instructions and warnings. Failure to do so could result in injury or death.
• Select the correct wire rope clips for the application.
• Never use cast malleable wire rope clips for lifting or suspending ANY load.
• The size of the wire rope clip must match the size of the wire rope or cable diameter.
• When applying a wire rope clip to coated cable, always match the size of the wire rope clip to the diameter of the uncoated cable.
The cable coating must be stripped off of the cable where wire rope clips are to be attached.
• Never use fewer than the number of clips defined in the specifications for each type of wire rope clip.
• Never use wire rope clips on pipe, rod, chain, fiber rope, etc.
• Never connect two ends of wire rope with wire rope clips.
• Never shock load or impact wire rope or cable when wire rope clips are applied.
• Inspect wire rope clips before each use. Discard and replace wire rope clips that are worn, distorted, or damaged.
• Inspect wire rope clip nuts before and after each use and re-torque as is necessary.

For Select the Wire rope Clips Please view Special wire rope clip page.

TOOLEE GROUP INC.

Qingdao Lifting and Rigging Corp.

Stainless steel Type 316 or AISI304 wire rope clips are used for what types of applications?  Standard meet US Fed.Spec or DIN 741 or JIS or Customer demand.

a) Acidic environments

b) Salt water

Malleable galvanized wire rope clips are used for what types of applications?  STandard Meet the DIN 741,DIN 1142,  FF-450,  TYPE A, TYPE B,

A) General purpose

B) Indoors or outdoors

C) Not for extreme load applications

Drop forged galvanized wire rope clips are used for what types of applications?

Meet the standard of European Market / Italy type or France Type, or FF-C-45OD US FEDERAL SPEC.

** Critical load applications

For Detail of the Wire Rope Clips you can click the Reference link.

TOOLEE GROUP INC. 2009 FEB.03

TONNY

Everything Gonne be normal.

Tonny

and almost all of the company stop the business.

everybody in the holiday for celebrating the Festival.

During the holiday we can’t confirm anything which including the price the production time as the material we can’t buy, the price we can’t know.

anyhow we can reply by email, please do not send the question by fax, only email.

TOOLEE GROUP INC.

Qingdao Lifting and Rigging Corp.

The stainless steel also called by INOX. or 1.4401 1.4404

The stainless thimble usually used together with stainless steel wire rope as end fitted together for swaged eye to protect the wire rope avoid abrasion during using for lifting or towing.

Currrently we can supply the stainless steel thimble with meet the standard of meet the performance require-ments of Federal Specification FF-T-276b Type II. and G-414 meet the performance require-ments of Federal Specification FF-T-276b Type III.

The two types supplied to AMERICAN MARKET.

Also we can supply the european market with the standard of DIN6899B AND DIN6899A, Also the commercial european type.

For learn more about the stainless steel thimble please check the technical sheet of our website link:

http://www.rigginglifting.com/product/Stainless-Steel-Rigging/Stainless-Steel-Thimble1.html

COPY RIGHT @ TOOLEE GROUP INC.

2009 0109

Grade 100 connecting link,

Grade 100 sling hook, which including eye type and clevis type.

Grade 100 Self locking safety hook, including eye type, clevis type and swivel type.

Grade 100 Eye Grab Hook.

Grade 100 Master link and G100 master link assembly.

Detail about the specification please click: http://www.rigginglifting.com/product/Grade-100-Chain-Components1.html

 PLEASE NOTED THAT ALL GRADE 100 CHAIN FITTINGS WITH PAINTED GREEN.

COPY RIGHT @ TOOLEE GROUP INC Qindao Lifting and Rigging Corp.

2009 0105

But for now what we should do is:

If you wanna to order some items please do it asap, As the material looks like rising again, cause after about 60 days production limited of the steel market,

the wharehouse only small quantity in stock. The steel becoming smaller and smaller on the market,

Another important, after Spring festival the Domestic requirment will increased a lot. Cause every Spring is the new house building time.

Toolee wanna to arrange everything before the holiday.

Toolee Group Inc.

Tonny Writed dated on JAN.06, 2009

Special the exchange EUR/RMB, from the begain with EUR/RMB=11.10 The topest of the Year. But during Nov. the bottom is EUR/RMB=8.5, how is the range? 24%!!!

Means for what? Means if no others factor changed, the price will increased 24% if the exporter wanna to keep the same lever profit.

The good News is During the 2008, the USD did not changed so much range, and most of our custom pay with USD.

anyhow we should find the exchange market did not stop it’s fluctuate, it’s big fluctuate!

Facing the fluctuate exchange rate, what should we do? we should we offer our exporting price? It’s really very difficult! The best way is the exchange rate can becoming stable in the new year. But Now It’s just our thoughts, can it be come true? Let’s waiting till Dec.29, 2009!

From the Below link, you can find our recording for the exchange rate:

USD/RMB http://www.rigginglifting.com/information/2007-12-25/2007122540.html

EUR/RMB http://www.rigginglifting.com/information/2008-09-06/2008090669.html

copy right @ TOOLEE GROUP INC.

many special things happened in the year!

The heavy snow storm in the begaining, Olympic games, SICHUAN wenchuan EARTHQUAKE, At the same time, the steel raw material increased 2 times compare earlier of 2008, but following the ECNOMIC CRISIS coming quickly….

Facing the ECNOMIC CRISIS, what should we do? Still we purchasing as before with a big quantity for get a price with 2% discount ? or just order a small quantity with many many items shipping mixed?

which way is suit for you in a ECNOMIC CRISIS time?

Though ecnomic is heavy, also the world market have a problem for FINICAL, but LIFE AND BUSINESS DID NOT STOP, everything should be go on…..

Anyhow, New year is new start, TOOLEE richfull our business line, every item we have special people service for you, also we know in a special time, for you order a big order is a question, so we can accept the order with many items but every item with a small quantity, (but please do not very small), it’s ok, we only ask the total value beyond USD5000.00

WE wish all of our customers and all of the people have a new happy new year, and hope everybody’s business going smoothly.

TOOLEE GROUP INC.

2008 12 29

http://www.tooleeshackle.com

From this website you can find every kinds of shackle Supplied by TOOLEE. From FORGED LIFTING SHACKLE to commercial shackle, From Stainless shackle to Steel Shackle, The shackle can used for LIFTING, LASHING, TOWING, TRAWLING, AND POWER LINE, ALSO FOR OTHERS COMMERCIAL USING.

Also you can find most of these shackle from our original website: http://www.rigginglifting.com/product/Rigging-Hardware/shackle1.html

Any question for Shackle and For TOOLEE GROUP INC. please contact by email or fax or mail as the information on our contact page.

COPY RIGHT @ TOOLEE GROUP INC.

All Staff working in Toolee Wish you:  Merry Christimas and a Happy New Year.

As 2008, Toolee Will Supply you a full range on rigging lifting trawling and lashing products.

It’s not importand for the item we are not dealing, the important is we always try our best to meet your new requirments.

Our TNT express collect account always open for you. New forging and pressing products you can send with we pay the express charge.

TOOLEE GROUP INC.—We aim to be the one you first supplier for SUPPLY CHAIN on rigging and lifting full range, you real one stop station for purchasing.

Very small type. With Nickel Plated and the screw is Brass. Now Toolee Can supply the pear shaped Quick link with the size of 2.5mm.

Copy right @ Toolee Group Inc.

  This the kelly’s type. We have the size of 10ton, 15ton, 20ton, all mentioned with working load limited. breaking load is 5 times of the working load. Made by Alloy steel forged.

 This is the DV type viking link We have size of 1.5ton, 3ton,5ton,8ton

 This the the type of Viking recessed link, we have the size of 10ton, 12ton, 15ton, 20ton.

This three viking link usually use together.

More detail production information or price information please contact with TOOLEE. being the best supplier for rigging and lifting products is our target.

TOOLEE GROUP INC.

COPY RIGHT @ Rigginglifting.com

At the thumb screw end, the elasticity of the shackle’s body locks the pin’s position into one or other of its small indentations. There is no need to worry about it accidentally coming loose due to vibrations.

Not only are these self-locking, the pin is also connected to the body at all times, even when fully opened. Consequently, there is no more risk of seeing it fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand.

Closing these threadless shackles is done simply by rotating the pin half a done simply by rotating the pin half a turn: it doesn’t get much quicker? For major loads, there are also high-resistance versions.

TOOLEE GROUP INC.

 is a form of galvanization. It is the process of coating iron or steel with a thin zinc layer, by passing the steel through a molten bath of zinc at a temperature of around 860 °F (460 °C). When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide, which further reacts with carbon dioxide to form zinc carbonate, a dull grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements. Galvanized steel is widely used in applications where rust resistance is needed, and can be identified by the crystallization patterning on the surface (often called a “spangle”).

The process of hot-dip galvanizing results in a metallurgical bond between zinc and steel with a series of distinct iron-zinc alloys. The resulting coated steel can be used in much the same way as uncoated. Galvanized steel can be welded; however, one must exercise caution around the resulting zinc fumes. Galvanized steel is suitable for high-temperature applications of up to 392 °F (200 °C). Use at temperatures above this level will result in peeling of the zinc at the intermetallic layer. Galvanized sheet steel is commonly used in automotive manufacture to enhance corrosion performance of exterior body panels of some models.

Steel strip can be hot-dip galvanized in a continuous line. Hot-dip galvanized steel strip (also sometimes loosely referred to as galvanized iron) is extensively used for applications requiring the strength of steel and resistance to corrosion. Applications include: roofing and walling, safety barriers, handrails, consumer appliances and automotive body parts. One common use is in metal pails. They are also used in most heating and cooling duct systems in buildings

Individual metal articles, such as steel girders or wrought iron gates, can be hot-dip galvanized by a process called batch galvanizing. Other modern techniques have largely replaced hot-dip for these sorts of roles. This includes electrogalvanizing, which deposits the layer of zinc from an aqueous electrolyte by electroplating, forming a thinner and much stronger bond.

PlEASE NOTED THAT, HOT DIPPED GALV. USUALLY USE FOR MARINE OR FISHING IN FRESH WATER OR SEA-WATER, BUT FOR E-GALV. PRODUCTS USUALLY FOR COMMERCIAL WITH INDOOR USEING OR NOT IMPORTANT OURDOOR USING.

HOT DIPPED GALV. HAVE ANOTHER NAME, THAT IS FIRE GALV. DURING THE INTERNATIONAL BUSINESS, THE ELECTRIC GALV. USUALLY CALLED BY GALV.

IF THERE IS NO SPECIFICATION, WE CALL GALV WITH E-GALV.

IF SAYING ON SHACKLE, THE LIFTING FORGED SHACKLE ALWAYS WITH HOT DIPPED GALV., ONLY VERY SMALL PARTS WITH E-GALV. AS ALWAYS THE SHACKLE USEING WITH BAD SURROUDING. SUCH FOR SEA-WATER, HARBOUR AND MINING FISHING ….

if compare the hot dipped galv. and e-galv. by eye, please noted hot dipped galv allways have a rough surface compare e-galv. and the e-galv. with shinny color as the zinc is  equality after E-galv.

Copy right @ Toolee group inc.

ALWAYS USE THE LARGEST DIAMETER!!!

Wire Rope is always measured across the largest diameter that will fit inside a true circle. Wire Rope is always made larger, not smaller, than the nominal diameter. However, wear tends to reduce rope diameter. The allowable tolerances for new Type N wire rope, 3/4″ diameter, is 1/32″ oversize. In standard practice, the nominal diameter is the minimum diameter. A rope is not considered oversized until its diameter exceeds 1/32″ oversize.

The RIGHT picture is the correct way and the wrong way for measuring.

for checking the wire rope’s detail please check the below link:

http://www.rigginglifting.com/product/Wire-Ropes-and-Fittings/Steel-Wire-Rope1.html

2008 12 10, POSTED BY TONNY

copy right @ TOOLEE GROUP INC.

Turnbuckles serve as a load-rated tensioning and leveling device. For tensioning, one end always comes with a reversed thread so that when it is placed into service between two objects in its fully extended position, the housing may be rotated back to shorten the overall component, pulling the threaded arms in and putting additional tension into the system, such as between two anchored wire rope assemblies. Turnbuckles are also employed as leveling devices to bring overhead truss and grids into a level attitude. Its eye fittings accommodate shackles, quicklinks, etc.

Article from Adaptive Technologis Group.

Toolee Group Inc. 2008 1206

The screw pin version of shackle is ideal for the joining of two closed-end items together, such as wire rope assemblies, turnbuckles and eyebolts. The small hole in its pin offers a back up safety feature by securing a wire or cable tie through the holes and around the body of the shackle. This prevents the pin from loosening through vibration and is known as “mousing” the shackle. Shackles are rated for overhead suspensions because of this redundant locking feature and the radius portion of their body structurally accommodates three way bridles.

Article from copy from adaptive technoligis group.

Toolee Group inc. 2008 12 06

Toolee Group Inc.

Qingdao Lifting & Rigging Corp Moved into our NEW office

Detail Address & Contact Information:

TOOLEE GROUP INC. Industrial Co. Ltd.

ROOM 1704, TOWER 2-B BUILDING ARTECH CENTER, NO. 63, HAIER ROAD, QINGDAO, CHINA

P.C.: 266071
TEL: +86 532 8099 9539    +86 532 8866 8543
FAX: +86 532 8099 9529    +86 532  8273 7869

General Question: info@rigginglifting.com

Home page: http://www.rigginglifting.com

Contact page URL: http://www.rigginglifting.com/contact.html

Second: our comprehensive products we can give you a competitive price.

Third: Toolee’s STUFF have a very richfull experience on RIGGING Products, Being my personal, i have more than 6 years on RIGGING fields. We know how can you supply you the quality products with good price.

Writed by TONNY. 2008 0630

Enjoy you time in here.